ITRU GROUP LTD-International Textile Research Unit What's new
Weaving Mill Manager ver 1.0 for Production and Cost Planning and Control For Fabric Manufacturers Click here to read more
Itru Fabric Setting ver 3.0 just released Click Here to Read more
With new supplements of Interactive Textile Training for Productivity in Spinning and Weaving Mills Click Here To Read More
A TRAINING COURSE FOR PROCESS IMPROVEMENT IN COTTON SPINNING & GINNING WITH ITRU FIBRE TESTER UAK-1 ++
Click here to Download Pdf File For Further Information
CHECK YOUR MILL PERFORMANCE LEVEL WITH ITRU FIBRE TESTER UAK-1 + UAK-1 + is an advanced fibre/sliver/waste information system hence necessitates training and mill application to be effectively utilised. These testing cover following subjects in details. -Fibre mix selection -Mixing and blending -Processing the blend -Control of processes and machinery -Test plans for Process Improvement and Optimization -Defect Analyses of Knitted and Woven fabrics A detailed report for Process Improvement and Optimization will be prepared according to samples tested and your technical information provided for a reasonable amount of payment. Click here to read more 101 TEST PARAMETERS With Reliability, Reproducibility and Relativity with End Use Yarns and Fabrics THE MOST COMPREHENSIVE TESTING INFORMATION AND THE FASTEST FOR FIBRES AND FABRICS New innovative measurement algorithms enable high correlation with fibre properties and yarn and fabric properties and performances -Select optimum mix according to your required yarn and fabric quality parameters -Low neps in raw cotton low neps in fabrics -Low white specks in cotton low white specks in fabrics -Low surface damaged fibres less pilling fault in fabrics -Select lower grade cotton and improve your process and increase your production in ring frames -Reduce your total waste and earn more in ginning and spinning -Do not damage in fibres in ginning and increase your fibre quality and fibre yield -Testing of Grey Fabric Fineness/Maturity Fabric to Fibre and Fibre to Fabric Conversion Algorithms -Unlimited end use and unlimited field of applications ITRU FIBRE/FABRIC TESTER UAK-1 + WITH LOWEST COST AT HIGHEST RETURN Click Here to Read More
5.7 New Method of Determination of CV% of Fibre Parallelism or Degree of Straightened Hooked Fibres (Click Here To Read The Whole Paper ) The function of carding and subsequent processes are to straighten hooks and make parallel the fibres. The performance of these processes could be checked by Itru CV % Fibre Parallelism (Coefficient of Variation Percentage of Fibre Parallelism) parameter developed for the 1st time in the world. CV% of Fibre Parallelism could be used to check off- standard running machinery and processing stages from bale to ring frame delivery. CVFP % IS A KEY FIBRE PROCES OPTIMISATION PARAMETER NOT ONLY FROM CARDING TO RING FRAME BUT ALSO FROM MACHINE HARVESTING TO GINNING .

ITRU GROUP LTD -International   Textile Research Unit

Serving to textile industry ,science and technology since 1992

© 1992-2008 by Itru   Group  ltd

Itru Group Ltd reserves rights to alterations to any pc-program , any report and information systems without given any notice.